# Warning
Do not assume Tor support works perfectly in Hush; better Tor support is currently being worked on.
# Hush + Tor
It is possible to run Hush as a Tor hidden service, and connect to such services.
The following directions assume you have a Tor proxy running on port 9050. Many distributions default to having a SOCKS proxy listening on port 9050, but others may not. In particular, the Tor Browser Bundle defaults to listening on port 9150. See [Tor Project FAQ:TBBSocksPort ](https://www.torproject.org/docs/faq.html.en#TBBSocksPort ) for how to properly
configure Tor.
1. Run Hush behind a Tor proxy
-------------------------------
The first step is running Hush behind a Tor proxy. This will already make all
outgoing connections be anonymized, but more is possible.
-proxy=ip:port Set the proxy server. If SOCKS5 is selected (default), this proxy
server will be used to try to reach .onion addresses as well.
-onion=ip:port Set the proxy server to use for Tor hidden services. You do not
need to set this if it's the same as -proxy. You can use -noonion
to explicitly disable access to hidden service.
-listen When using -proxy, listening is disabled by default. If you want
to run a hidden service (see next section), you'll need to enable
it explicitly.
-connect=X When behind a Tor proxy, you can specify .onion addresses instead
-addnode=X of IP addresses or hostnames in these parameters. It requires
-seednode=X SOCKS5. In Tor mode, such addresses can also be exchanged with
other P2P nodes.
In a typical situation, this suffices to run behind a Tor proxy:
./hushd -proxy=127.0.0.1:9050
If using the Tor Browser Bundle:
./hushd -proxy=127.0.0.1:9150
2. Run a Hush hidden server
----------------------------
If you configure your Tor system accordingly, it is possible to make your node also
reachable from the Tor network. Add these lines to your /etc/tor/torrc (or equivalent
config file):
HiddenServiceDir /var/lib/tor/hush-service/
HiddenServicePort 18030 127.0.0.1:18030
The directory can be different of course, but (both) port numbers should be equal to
your hushd's P2P listen port (18030 by default).
-externalip=X You can tell Hush about its publicly reachable address using
this option, and this can be a .onion address. Given the above
configuration, you can find your onion address in
/var/lib/tor/hush-service/hostname. Onion addresses are given
preference for your node to advertize itself with, for connections
coming from unroutable addresses (such as 127.0.0.1, where the
Tor proxy typically runs).
-listen You'll need to enable listening for incoming connections, as this
is off by default behind a proxy.
-discover When -externalip is specified, no attempt is made to discover local
IPv4 or IPv6 addresses. If you want to run a dual stack, reachable
from both Tor and IPv4 (or IPv6), you'll need to either pass your
other addresses using -externalip, or explicitly enable -discover.
Note that both addresses of a dual-stack system may be easily
linkable using traffic analysis.
In a typical situation, where you're only reachable via Tor, this should suffice:
./hushd -proxy=127.0.0.1:9050 -externalip=hushc0de123.onion -listen
(obviously, replace the Onion address with your own). Currently only v2 HS's are supported.
It should be noted that you still listen on all devices and another node could establish a clearnet connection, when knowing
your address. To mitigate this, additionally bind the address of your Tor proxy:
./hushd ... -bind=127.0.0.1
If you don't care too much about hiding your node, and want to be reachable on IPv4
as well, use `discover` instead:
./hushd ... -discover
and open port 18030 on your firewall.
If you only want to use Tor to reach onion addresses, but not use it as a proxy
for normal IPv4/IPv6 communication, use:
./hushd -onion=127.0.0.1:9050 -externalip=hushc0de123.onion -discover
3. Automatically listen on Tor
--------------------------------
Starting with Tor version 0.2.7.1 it is possible, through Tor's control socket
API, to create and destroy 'ephemeral' hidden services programmatically.
Hush has been updated to make use of this.
This means that if Tor is running (and proper authentication has been configured),
Hush automatically creates a hidden service to listen on. Hush will also use Tor
automatically to connect to other .onion nodes if the control socket can be
successfully opened. This will positively affect the number of available .onion
nodes and their usage.
This new feature is enabled by default if Hush is listening (`-listen`), and
requires a Tor connection to work. It can be explicitly disabled with `-listenonion=0`
and, if not disabled, configured using the `-torcontrol` and `-torpassword` settings.
To show verbose debugging information, pass `-debug=tor` .
Connecting to Tor's control socket API requires one of two authentication methods to be
configured. For cookie authentication the user running hushd must have write access
to the `CookieAuthFile` specified in Tor configuration. In some cases this is
preconfigured and the creation of a hidden service is automatic. If permission problems
are seen with `-debug=tor` they can be resolved by adding both the user running tor and
the user running hushd to the same group and setting permissions appropriately. On
Debian-based systems the user running hushd can be added to the debian-tor group,
which has the appropriate permissions. An alternative authentication method is the use
of the `-torpassword` flag and a `hash-password` which can be enabled and specified in
Tor configuration.
4. Connect to a Hush hidden server
-----------------------------------
To test your set-up, you might want to try connecting via Tor on a different computer to just a
a single Hush hidden server. Launch hushd as follows:
./hushd -onion=127.0.0.1:9050 -connect=fuckzookoie6wxgio.onion
Now use hush-cli to verify there is only a single peer connection.
hush-cli getpeerinfo
[
{
"id" : 1,
"addr" : "zcashhoneypot.onion:18030",
...
"version" : 1987420,
"subver" : "/GoldenSandtrout:3.6.0/",
...
}
]
To connect to multiple Tor nodes, use:
./hushd -onion=127.0.0.1:9050 -addnode=hushbeef123.onion -dnsseed=0 -onlynet=onion
