Change default ports

contrib/bitrpc/bitrpc.py

@@ -11,9 +11,9 @@ rpcpass = ""
 
 
 if rpcpass == "":
-    access = ServiceProxy("http://127.0.0.1:8332")
+    access = ServiceProxy("http://127.0.0.1:8232")
 else:
-    access = ServiceProxy("http://"+rpcuser+":"+rpcpass+"@127.0.0.1:8332")
+    access = ServiceProxy("http://"+rpcuser+":"+rpcpass+"@127.0.0.1:8232")
 cmd = sys.argv[1].lower()
 
 if cmd == "backupwallet":

contrib/debian/examples/bitcoin.conf

@@ -44,11 +44,11 @@
 
 # Use as many addnode= settings as you like to connect to specific peers
 #addnode=69.164.218.197
-#addnode=10.0.0.2:8333
+#addnode=10.0.0.2:8233
 
 # Alternatively use as many connect= settings as you like to connect ONLY to specific peers
 #connect=69.164.218.197
-#connect=10.0.0.1:8333
+#connect=10.0.0.1:8233
 
 # Listening mode, enabled by default except when 'connect' is being used
 #listen=1
@@ -89,7 +89,7 @@
 #rpcallowip=2001:db8:85a3:0:0:8a2e:370:7334/96
 
 # Listen for RPC connections on this TCP port:
-#rpcport=8332
+#rpcport=8232
 
 # You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind
 # running on another host using this option:

contrib/debian/manpages/bitcoin-cli.1

@@ -32,7 +32,7 @@ Username for JSON\-RPC connections.
 Password for JSON\-RPC connections.
 .TP
 \fB\-rpcport=\fR<port>
-Listen for JSON\-RPC connections on <port> (default: 8332 or testnet: 18332).
+Listen for JSON\-RPC connections on <port> (default: 8232 or testnet: 18232).
 .TP
 \fB\-rpcconnect=\fR<ip>
 Send commands to node running on <ip> (default: 127.0.0.1).

contrib/debian/manpages/bitcoin-qt.1

@@ -41,7 +41,7 @@ Use proxy to reach tor hidden services (default: same as \fB\-proxy\fR)
 Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR
 .TP
 \fB\-port=\fR<port>
-Listen for connections on <port> (default: 8333 or testnet: 18333)
+Listen for connections on <port> (default: 8233 or testnet: 18233)
 .TP
 \fB\-maxconnections=\fR<n>
 Maintain at most <n> connections to peers (default: 125)
@@ -122,7 +122,7 @@ Username for JSON\-RPC connections
 Password for JSON\-RPC connections
 .TP
 \fB\-rpcport=\fR<port>
-Listen for JSON\-RPC connections on <port> (default: 8332 or testnet: 18332)
+Listen for JSON\-RPC connections on <port> (default: 8232 or testnet: 18232)
 .TP
 \fB\-rpcallowip=\fR<ip>
 Allow JSON\-RPC connections from specified IP address

contrib/debian/manpages/bitcoin.conf.5

@@ -18,10 +18,10 @@ Enable or disable run on the test network instead of the real *bitcoin* network.
 \fBproxy=\fR\fI'127.0.0.1:9050'\fR
 Connect via a socks4 proxy.
 .TP
-\fBaddnode=\fR\fI'10.0.0.2:8333'\fR
+\fBaddnode=\fR\fI'10.0.0.2:8233'\fR
 Use as many *addnode=* settings as you like to connect to specific peers.
 .TP
-\fBconnect=\fR\fI'10.0.0.1:8333'\fR
+\fBconnect=\fR\fI'10.0.0.1:8233'\fR
 Use as many *connect=* settings as you like to connect ONLY to specific peers.
 .TP
 \fRmaxconnections=\fR\fI'value'\fR
@@ -40,7 +40,7 @@ You must set *rpcpassword* to secure the JSON-RPC api.
 \fBrpcallowip=\fR\fI'192.168.1.*'\fR
 By default, only RPC connections from localhost are allowed. Specify as many *rpcallowip=* settings as you like to allow connections from other hosts (and you may use * as a wildcard character).
 .TP
-\fBrpcport=\fR\fI'8332'\fR
+\fBrpcport=\fR\fI'8232'\fR
 Listen for RPC connections on this TCP port.
 .TP
 \fBrpcconnect=\fR\fI'127.0.0.1'\fR

contrib/linearize/example-linearize.cfg

@@ -3,8 +3,8 @@
 rpcuser=someuser
 rpcpassword=somepassword
 host=127.0.0.1
-port=8332
-#port=18332
+port=8232
+#port=18232
 
 # bootstrap.dat hashlist settings (linearize-hashes)
 max_height=313000

contrib/linearize/linearize-hashes.py

@@ -96,7 +96,7 @@ if __name__ == '__main__':
 	if 'host' not in settings:
 		settings['host'] = '127.0.0.1'
 	if 'port' not in settings:
-		settings['port'] = 8332
+		settings['port'] = 8232
 	if 'min_height' not in settings:
 		settings['min_height'] = 0
 	if 'max_height' not in settings:

contrib/qos/README.md

@@ -1,5 +1,5 @@
 ### Qos ###
 
-This is a Linux bash script that will set up tc to limit the outgoing bandwidth for connections to the Bitcoin network. It limits outbound TCP traffic with a source or destination port of 8333, but not if the destination IP is within a LAN (defined as 192.168.x.x).
+This is a Linux bash script that will set up tc to limit the outgoing bandwidth for connections to the Bitcoin network. It limits outbound TCP traffic with a source or destination port of 8233, but not if the destination IP is within a LAN (defined as 192.168.x.x).
 
 This means one can have an always-on bitcoind instance running, and another local bitcoind/bitcoin-qt instance which connects to this node and receives blocks from it.

contrib/qos/tc.sh

@@ -32,10 +32,10 @@ tc filter add dev ${IF} parent 1: protocol ip prio 2 handle 2 fw classid 1:11
 #	ret=$?
 #done
 
-#limit outgoing traffic to and from port 8333. but not when dealing with a host on the local network
+#limit outgoing traffic to and from port 8233. but not when dealing with a host on the local network
 #	(defined by $LOCALNET)
 #	--set-mark marks packages matching these criteria with the number "2"
 #	these packages are filtered by the tc filter with "handle 2"
 #	this filter sends the packages into the 1:11 class, and this class is limited to ${LIMIT}
-iptables -t mangle -A OUTPUT -p tcp -m tcp --dport 8333 ! -d ${LOCALNET} -j MARK --set-mark 0x2
-iptables -t mangle -A OUTPUT -p tcp -m tcp --sport 8333 ! -d ${LOCALNET} -j MARK --set-mark 0x2
+iptables -t mangle -A OUTPUT -p tcp -m tcp --dport 8233 ! -d ${LOCALNET} -j MARK --set-mark 0x2
+iptables -t mangle -A OUTPUT -p tcp -m tcp --sport 8233 ! -d ${LOCALNET} -j MARK --set-mark 0x2

contrib/seeds/generate-seeds.py

@@ -127,10 +127,10 @@ def main():
     g.write(' * IPv4 as well as onion addresses are wrapped inside a IPv6 address accordingly.\n')
     g.write(' */\n')
     with open(os.path.join(indir,'nodes_main.txt'),'r') as f:
-        process_nodes(g, f, 'pnSeed6_main', 8333)
+        process_nodes(g, f, 'pnSeed6_main', 8233)
     g.write('\n')
     with open(os.path.join(indir,'nodes_test.txt'),'r') as f:
-        process_nodes(g, f, 'pnSeed6_test', 18333)
+        process_nodes(g, f, 'pnSeed6_test', 18233)
     g.write('#endif // BITCOIN_CHAINPARAMSSEEDS_H\n')
             
 if __name__ == '__main__':

contrib/spendfrom/spendfrom.py

@@ -67,7 +67,7 @@ def connect_JSON(config):
     testnet = config.get('testnet', '0')
     testnet = (int(testnet) > 0)  # 0/1 in config file, convert to True/False
     if not 'rpcport' in config:
-        config['rpcport'] = 18332 if testnet else 8332
+        config['rpcport'] = 18232 if testnet else 8232
     connect = "http://%s:%s@127.0.0.1:%s"%(config['rpcuser'], config['rpcpassword'], config['rpcport'])
     try:
         result = ServiceProxy(connect)

doc/REST-interface.md

@@ -54,7 +54,7 @@ https://github.com/bitcoin/bips/blob/master/bip-0064.mediawiki
 
 Example:
 ```
-$ curl localhost:18332/rest/getutxos/checkmempool/b2cdfd7b89def827ff8af7cd9bff7627ff72e5e8b0f71210f92ea7a4000c5d75-0.json 2>/dev/null | json_pp
+$ curl localhost:18232/rest/getutxos/checkmempool/b2cdfd7b89def827ff8af7cd9bff7627ff72e5e8b0f71210f92ea7a4000c5d75-0.json 2>/dev/null | json_pp
 {
    "chaintipHash" : "00000000fb01a7f3745a717f8caebee056c484e6e0bfe4a9591c235bb70506fb",
    "chainHeight" : 325347,
@@ -80,4 +80,4 @@ $ curl localhost:18332/rest/getutxos/checkmempool/b2cdfd7b89def827ff8af7cd9bff76
 
 Risks
 -------------
-Running a web browser on the same node with a REST enabled bitcoind can be a risk. Accessing prepared XSS websites could read out tx/block data of your node by placing links like `<script src="http://127.0.0.1:8332/rest/tx/1234567890.json">` which might break the nodes privacy.
+Running a web browser on the same node with a REST enabled bitcoind can be a risk. Accessing prepared XSS websites could read out tx/block data of your node by placing links like `<script src="http://127.0.0.1:8232/rest/tx/1234567890.json">` which might break the nodes privacy.

doc/developer-notes.md

@@ -156,7 +156,7 @@ Threads
 
 - ThreadMapPort : Universal plug-and-play startup/shutdown
 
-- ThreadSocketHandler : Sends/Receives data from peers on port 8333.
+- ThreadSocketHandler : Sends/Receives data from peers on port 8233.
 
 - ThreadOpenAddedConnections : Opens network connections to added nodes.
 
@@ -168,7 +168,7 @@ Threads
 
 - ThreadFlushWalletDB : Close the wallet.dat file if it hasn't been used in 500ms.
 
-- ThreadRPCServer : Remote procedure call handler, listens on port 8332 for connections and services them.
+- ThreadRPCServer : Remote procedure call handler, listens on port 8232 for connections and services them.
 
 - BitcoinMiner : Generates bitcoins (if wallet is enabled).
 

doc/tor.md

@@ -46,11 +46,11 @@ reachable from the Tor network. Add these lines to your /etc/tor/torrc (or equiv
 config file):
 
 	HiddenServiceDir /var/lib/tor/bitcoin-service/
-	HiddenServicePort 8333 127.0.0.1:8333
-	HiddenServicePort 18333 127.0.0.1:18333
+	HiddenServicePort 8233 127.0.0.1:8233
+	HiddenServicePort 18233 127.0.0.1:18233
 
 The directory can be different of course, but (both) port numbers should be equal to
-your bitcoind's P2P listen port (8333 by default).
+your bitcoind's P2P listen port (8233 by default).
 
 	-externalip=X   You can tell bitcoin about its publicly reachable address using
 	                this option, and this can be a .onion address. Given the above
@@ -80,7 +80,7 @@ specify:
 
 	./bitcoind ... -discover
 
-and open port 8333 on your firewall (or use -upnp).
+and open port 8233 on your firewall (or use -upnp).
 
 If you only want to use Tor to reach onion addresses, but not use it as a proxy
 for normal IPv4/IPv6 communication, use:

qa/rpc-tests/rawtransactions.py

@@ -24,7 +24,7 @@ class RawTransactionsTest(BitcoinTestFramework):
         self.nodes = start_nodes(3, self.options.tmpdir)
 
         #connect to a local machine for debugging
-        #url = "http://bitcoinrpc:DP6DvqZtqXarpeNWyN3LZTFchCCyCUuHwNF7E8pX99x1@%s:%d" % ('127.0.0.1', 18332)
+        #url = "http://bitcoinrpc:DP6DvqZtqXarpeNWyN3LZTFchCCyCUuHwNF7E8pX99x1@%s:%d" % ('127.0.0.1', 18232)
         #proxy = AuthServiceProxy(url)
         #proxy.url = url # store URL on proxy for info
         #self.nodes.append(proxy)

src/bitcoin-cli.cpp

@@ -26,7 +26,7 @@ std::string HelpMessageCli()
     strUsage += HelpMessageOpt("-regtest", _("Enter regression test mode, which uses a special chain in which blocks can be "
                                              "solved instantly. This is intended for regression testing tools and app development."));
     strUsage += HelpMessageOpt("-rpcconnect=<ip>", strprintf(_("Send commands to node running on <ip> (default: %s)"), "127.0.0.1"));
-    strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Connect to JSON-RPC on <port> (default: %u or testnet: %u)"), 8332, 18332));
+    strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Connect to JSON-RPC on <port> (default: %u or testnet: %u)"), 8232, 18232));
     strUsage += HelpMessageOpt("-rpcwait", _("Wait for RPC server to start"));
     strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections"));
     strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections"));

src/chainparams.cpp

@@ -53,7 +53,7 @@ public:
         pchMessageStart[2] = 0x4e;
         pchMessageStart[3] = 0xd8;
         vAlertPubKey = ParseHex("04fc9702847840aaf195de8442ebecedf5b095cdbb9bc716bda9110971b28a49e0ead8564ff0db22209e0374782c093bb899692d524e9d6a6956e7c5ecbcd68284");
-        nDefaultPort = 8333;
+        nDefaultPort = 8233;
         nMinerThreads = 0;
         nMaxTipAge = 24 * 60 * 60;
         nPruneAfterHeight = 100000;
@@ -156,7 +156,7 @@ public:
         pchMessageStart[2] = 0xe7;
         pchMessageStart[3] = 0x55;
         vAlertPubKey = ParseHex("04302390343f91cc401d56d68b123028bf52e5fca1939df127f63c6467cdf9c8e2c14b61104cf817d0b780da337893ecc4aaff1309e536162dabbdb45200ca2b0a");
-        nDefaultPort = 18333;
+        nDefaultPort = 18233;
         nMinerThreads = 0;
         nMaxTipAge = 0x7fffffff;
         nPruneAfterHeight = 1000;

src/chainparamsbase.cpp

@@ -17,7 +17,7 @@ class CBaseMainParams : public CBaseChainParams
 public:
     CBaseMainParams()
     {
-        nRPCPort = 8332;
+        nRPCPort = 8232;
     }
 };
 static CBaseMainParams mainParams;
@@ -30,7 +30,7 @@ class CBaseTestNetParams : public CBaseMainParams
 public:
     CBaseTestNetParams()
     {
-        nRPCPort = 18332;
+        nRPCPort = 18232;
         strDataDir = "testnet3";
     }
 };

src/init.cpp

@@ -320,7 +320,7 @@ std::string HelpMessage(HelpMessageMode mode)
     strUsage += HelpMessageOpt("-onion=<ip:port>", strprintf(_("Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)"), "-proxy"));
     strUsage += HelpMessageOpt("-onlynet=<net>", _("Only connect to nodes in network <net> (ipv4, ipv6 or onion)"));
     strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %u)"), 1));
-    strUsage += HelpMessageOpt("-port=<port>", strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), 8333, 18333));
+    strUsage += HelpMessageOpt("-port=<port>", strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), 8233, 18233));
     strUsage += HelpMessageOpt("-proxy=<ip:port>", _("Connect through SOCKS5 proxy"));
     strUsage += HelpMessageOpt("-proxyrandomize", strprintf(_("Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)"), 1));
     strUsage += HelpMessageOpt("-seednode=<ip>", _("Connect to a node to retrieve peer addresses, and disconnect"));
@@ -418,7 +418,7 @@ std::string HelpMessage(HelpMessageMode mode)
     strUsage += HelpMessageOpt("-rpcbind=<addr>", _("Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces)"));
     strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections"));
     strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections"));
-    strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), 8332, 18332));
+    strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), 8232, 18232));
     strUsage += HelpMessageOpt("-rpcallowip=<ip>", _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times"));
     strUsage += HelpMessageOpt("-rpcthreads=<n>", strprintf(_("Set the number of threads to service RPC calls (default: %d)"), 4));
     strUsage += HelpMessageOpt("-rpckeepalive", strprintf(_("RPC support for HTTP persistent connections (default: %d)"), 1));

src/rpcnet.cpp

@@ -180,8 +180,8 @@ Value addnode(const Array& params, bool fHelp)
             "1. \"node\"     (string, required) The node (see getpeerinfo for nodes)\n"
             "2. \"command\"  (string, required) 'add' to add a node to the list, 'remove' to remove a node from the list, 'onetry' to try a connection to the node once\n"
             "\nExamples:\n"
-            + HelpExampleCli("addnode", "\"192.168.0.6:8333\" \"onetry\"")
-            + HelpExampleRpc("addnode", "\"192.168.0.6:8333\", \"onetry\"")
+            + HelpExampleCli("addnode", "\"192.168.0.6:8233\" \"onetry\"")
+            + HelpExampleRpc("addnode", "\"192.168.0.6:8233\", \"onetry\"")
         );
 
     string strNode = params[0].get_str();
@@ -234,7 +234,7 @@ Value getaddednodeinfo(const Array& params, bool fHelp)
             "    \"connected\" : true|false,          (boolean) If connected\n"
             "    \"addresses\" : [\n"
             "       {\n"
-            "         \"address\" : \"192.168.0.201:8333\",  (string) The bitcoin server host and port\n"
+            "         \"address\" : \"192.168.0.201:8233\",  (string) The bitcoin server host and port\n"
             "         \"connected\" : \"outbound\"           (string) connection, inbound or outbound\n"
             "       }\n"
             "       ,...\n"

src/rpcserver.cpp

@@ -1036,7 +1036,7 @@ std::string HelpExampleCli(string methodname, string args){
 
 std::string HelpExampleRpc(string methodname, string args){
     return "> curl --user myusername --data-binary '{\"jsonrpc\": \"1.0\", \"id\":\"curltest\", "
-        "\"method\": \"" + methodname + "\", \"params\": [" + args + "] }' -H 'content-type: text/plain;' http://127.0.0.1:8332/\n";
+        "\"method\": \"" + methodname + "\", \"params\": [" + args + "] }' -H 'content-type: text/plain;' http://127.0.0.1:8232/\n";
 }
 
 const CRPCTable tableRPC;