trivial: Merge pruning help message after Transifex comment

The prune help message was broken in nonsensical parts. Merge it into one, this is easier for translators. Reported by yahoe.001 on transifex.
9 years ago · fc44231cb7
3 changed files with 43 additions and 62 deletions
--- a/src/init.cpp
+++ b/src/init.cpp
@ -275,11 +275,9 @@ std::string HelpMessage(HelpMessageMode mode)
 #ifndef WIN32
    strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file (default: %s)"), "bitcoind.pid"));
 #endif
-    strUsage += HelpMessageOpt("-prune=<n>", _("Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex.") + " " +
-            _("Warning: Reverting this setting requires re-downloading the entire blockchain.") + " " +
-            _("(default: 0 = disable pruning blocks,") + " " +
-            strprintf(_(">%u = target size in MiB to use for block files)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));
-strUsage += HelpMessageOpt("-reindex", _("Rebuild block chain index from current blk000??.dat files") + " " + _("on startup"));
+    strUsage += HelpMessageOpt("-prune=<n>", strprintf(_("Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex. "
+            "Warning: Reverting this setting requires re-downloading the entire blockchain. "
+            "(default: 0 = disable pruning blocks, >%u = target size in MiB to use for block files)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));

 #if !defined(WIN32)
    strUsage += HelpMessageOpt("-sysperms", _("Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)"));
--- a/src/qt/bitcoinstrings.cpp
+++ b/src/qt/bitcoinstrings.cpp
@ -109,7 +109,10 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
 "isolation (default: %u)"),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
 "Reduce storage requirements by pruning (deleting) old blocks. This mode "
-"disables wallet support and is incompatible with -txindex."),
+"disables wallet support and is incompatible with -txindex. Warning: "
+"Reverting this setting requires re-downloading the entire blockchain. "
+"(default: 0 = disable pruning blocks, >%u = target size in MiB to use for "
+"block files)"),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
 "Require high priority for relaying free or low-fee transactions (default: %u)"),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
@ -158,9 +161,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
 "Warning: Please check that your computer's date and time are correct! If "
 "your clock is wrong Bitcoin Core will not work properly."),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
-"Warning: Reverting this setting requires re-downloading the entire "
-"blockchain."),
-QT_TRANSLATE_NOOP("bitcoin-core", ""
 "Warning: The network does not appear to fully agree! Some miners appear to "
 "be experiencing issues."),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
@ -184,14 +184,13 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
 "mode.  This will redownload the entire blockchain"),
 QT_TRANSLATE_NOOP("bitcoin-core", "(default: %s)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "(default: %u)"),
-QT_TRANSLATE_NOOP("bitcoin-core", "(default: 0 = disable pruning blocks,"),
 QT_TRANSLATE_NOOP("bitcoin-core", "(default: 1)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "<category> can be:"),
-QT_TRANSLATE_NOOP("bitcoin-core", ">%u = target size in MiB to use for block files)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Accept command line and JSON-RPC commands"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Accept connections from outside (default: 1 if no -proxy or -connect)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Accept public REST requests (default: %u)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Acceptable ciphers (default: %s)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Activating best chain..."),
 QT_TRANSLATE_NOOP("bitcoin-core", "Add a node to connect to and attempt to keep the connection open"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Allow DNS lookups for -addnode, -seednode and -connect"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Allow self signed root certificates (default: 0)"),
@ -276,7 +275,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", "RPC server options:"),
 QT_TRANSLATE_NOOP("bitcoin-core", "RPC support for HTTP persistent connections (default: %d)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Randomly drop 1 of every <n> network messages"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Randomly fuzz 1 of every <n> network messages"),
-QT_TRANSLATE_NOOP("bitcoin-core", "Rebuild block chain index from current blk000??.dat files"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Relay and mine data carrier transactions (default: %u)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Relay non-P2SH multisig (default: %u)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Rescan the block chain for missing wallet transactions"),
--- a/src/qt/locale/bitcoin_en.ts
+++ b/src/qt/locale/bitcoin_en.ts
@ -3584,22 +3584,22 @@
 <context>
    <name>bitcoin-core</name>
    <message>
-        <location filename="../bitcoinstrings.cpp" line="+269"/>
+        <location filename="../bitcoinstrings.cpp" line="+268"/>
        <source>Options:</source>
        <translation>Options:</translation>
    </message>
    <message>
-        <location line="+35"/>
+        <location line="+34"/>
        <source>Specify data directory</source>
        <translation>Specify data directory</translation>
    </message>
    <message>
-        <location line="-94"/>
+        <location line="-93"/>
        <source>Connect to a node to retrieve peer addresses, and disconnect</source>
        <translation>Connect to a node to retrieve peer addresses, and disconnect</translation>
    </message>
    <message>
-        <location line="+97"/>
+        <location line="+96"/>
        <source>Specify your own public address</source>
        <translation>Specify your own public address</translation>
    </message>
@ -3624,7 +3624,7 @@
        <translation>Accept connections from outside (default: 1 if no -proxy or -connect)</translation>
    </message>
    <message>
-        <location line="-170"/>
+        <location line="-168"/>
        <source>Bind to given address and always listen on it. Use [host]:port notation for IPv6</source>
        <translation>Bind to given address and always listen on it. Use [host]:port notation for IPv6</translation>
    </message>
@ -3664,7 +3664,12 @@
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+22"/>
+        <location line="+15"/>
+        <source>Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, &gt;%u = target size in MiB to use for block files)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+10"/>
        <source>Set the number of script verification threads (%u to %d, 0 = auto, &lt;0 = leave that many cores free, default: %d)</source>
        <translation type="unfinished"></translation>
    </message>
@ -3684,7 +3689,7 @@
        <translation>Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.</translation>
    </message>
    <message>
-        <location line="+9"/>
+        <location line="+6"/>
        <source>Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.</source>
        <translation>Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.</translation>
    </message>
@ -3709,7 +3714,7 @@
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+12"/>
+        <location line="+11"/>
        <source>(default: 1)</source>
        <translation type="unfinished"></translation>
    </message>
@ -3834,12 +3839,7 @@
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+6"/>
-        <source>Rebuild block chain index from current blk000??.dat files</source>
-        <translation>Rebuild block chain index from current blk000??.dat files</translation>
-    </message>
-    <message>
-        <location line="+12"/>
+        <location line="+17"/>
        <source>Set database cache size in megabytes (%d to %d, default: %d)</source>
        <translation type="unfinished"></translation>
    </message>
@ -3894,12 +3894,12 @@
        <translation>You need to rebuild the database using -reindex to change -txindex</translation>
    </message>
    <message>
-        <location line="-99"/>
+        <location line="-98"/>
        <source>Imports blocks from external blk000??.dat file</source>
        <translation>Imports blocks from external blk000??.dat file</translation>
    </message>
    <message>
-        <location line="-224"/>
+        <location line="-223"/>
        <source>Allow JSON-RPC connections from specified source. Valid for &lt;ip&gt; are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times</source>
        <translation type="unfinished"></translation>
    </message>
@ -3989,12 +3989,7 @@
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+3"/>
-        <source>Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location line="+3"/>
+        <location line="+9"/>
        <source>Require high priority for relaying free or low-fee transactions (default: %u)</source>
        <translation type="unfinished"></translation>
    </message>
@ -4043,11 +4038,6 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
        <source>Warning: Please check that your computer&apos;s date and time are correct! If your clock is wrong Bitcoin Core will not work properly.</source>
        <translation type="unfinished"></translation>
    </message>
-    <message>
-        <location line="+3"/>
-        <source>Warning: Reverting this setting requires re-downloading the entire blockchain.</source>
-        <translation type="unfinished"></translation>
-    </message>
    <message>
        <location line="+19"/>
        <source>Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway</source>
@ -4064,22 +4054,17 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+1"/>
-        <source>(default: 0 = disable pruning blocks,</source>
+        <location line="+5"/>
+        <source>Accept public REST requests (default: %u)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+3"/>
-        <source>&gt;%u = target size in MiB to use for block files)</source>
+        <location line="+2"/>
+        <source>Activating best chain...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
-        <source>Accept public REST requests (default: %u)</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location line="+4"/>
        <source>Allow self signed root certificates (default: 0)</source>
        <translation type="unfinished"></translation>
    </message>
@ -4209,7 +4194,7 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+8"/>
+        <location line="+7"/>
        <source>Send trace/debug info to console instead of debug.log file</source>
        <translation>Send trace/debug info to console instead of debug.log file</translation>
    </message>
@ -4339,17 +4324,17 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
        <translation>wallet.dat corrupt, salvage failed</translation>
    </message>
    <message>
-        <location line="-71"/>
+        <location line="-70"/>
        <source>Password for JSON-RPC connections</source>
        <translation>Password for JSON-RPC connections</translation>
    </message>
    <message>
-        <location line="-206"/>
+        <location line="-205"/>
        <source>Execute command when the best block changes (%s in cmd is replaced by block hash)</source>
        <translation>Execute command when the best block changes (%s in cmd is replaced by block hash)</translation>
    </message>
    <message>
-        <location line="+259"/>
+        <location line="+257"/>
        <source>Upgrade wallet to latest format</source>
        <translation>Upgrade wallet to latest format</translation>
    </message>
@ -4369,7 +4354,7 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
        <translation>This help message</translation>
    </message>
    <message>
-        <location line="-116"/>
+        <location line="-115"/>
        <source>Allow DNS lookups for -addnode, -seednode and -connect</source>
        <translation>Allow DNS lookups for -addnode, -seednode and -connect</translation>
    </message>
@ -4384,7 +4369,7 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
        <translation>Error loading wallet.dat: Wallet corrupted</translation>
    </message>
    <message>
-        <location line="-212"/>
+        <location line="-211"/>
        <source>(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)</source>
        <translation type="unfinished"></translation>
    </message>
@ -4419,22 +4404,22 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+48"/>
+        <location line="+51"/>
        <source>Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+37"/>
+        <location line="+34"/>
        <source>(default: %s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+9"/>
+        <location line="+7"/>
        <source>Acceptable ciphers (default: %s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+4"/>
+        <location line="+5"/>
        <source>Always query for peer addresses via DNS lookup (default: %u)</source>
        <translation type="unfinished"></translation>
    </message>
@ -4519,7 +4504,7 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location line="+9"/>
+        <location line="+8"/>
        <source>Relay and mine data carrier transactions (default: %u)</source>
        <translation type="unfinished"></translation>
    </message>
@ -4599,7 +4584,7 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
        <translation>Unknown network specified in -onlynet: &apos;%s&apos;</translation>
    </message>
    <message>
-        <location line="-119"/>
+        <location line="-118"/>
        <source>Cannot resolve -bind address: &apos;%s&apos;</source>
        <translation>Cannot resolve -bind address: &apos;%s&apos;</translation>
    </message>
@ -4644,12 +4629,12 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
        <translation>Cannot write default address</translation>
    </message>
    <message>
-        <location line="+77"/>
+        <location line="+76"/>
        <source>Rescanning...</source>
        <translation>Rescanning...</translation>
    </message>
    <message>
-        <location line="-64"/>
+        <location line="-63"/>
        <source>Done loading</source>
        <translation>Done loading</translation>
    </message>